Needle-free collagen stimulation support

V-Jet Cell Renewal

Skin does not lose its firmness overnight. Collagen production slows quietly, cheeks flatten, and the face starts to look tired rather than older. V-Jet Cell Renewal is Shebella's needle-free option built around a PLLA collagen stimulator, which works with your own cells to rebuild density from within instead of adding instant bulk.

Core Benefits

Helps to tighten skin

The treatment aids skin tightening by stimulating collagen production in the deeper layers of the skin. Over time, as we age, skin loses elasticity because collagen and elastin production drops. Poly-L-lactic acid, the key component in V-Jet Cell Renewal, acts as a biocompatible substance that triggers the body's natural collagen synthesis, which helps improve the skin's firmness and texture. As new collagen forms, the skin appears tighter, smoother, and more youthful.

Helps to create new cells on our own

The body's ability to generate new skin cells declines as we age, which leads to a dull, uneven skin tone. V-Jet Cell Renewal promotes cellular regeneration by encouraging fibroblasts — the cells that produce collagen and elastin — to repair and regenerate skin tissue. This process not only boosts collagen production but also enhances skin cell turnover, leading to the growth of new, healthy skin cells, and contributes to an overall revitalised complexion.

Helps rebuild the structure on face and eyes

Ageing can cause facial fat and bone volume loss, which affects the contour and structure of the face. Poly-L-lactic acid (PLLA) in V-Jet Cell Renewal is designed to replenish lost volume and support facial structure by promoting collagen in the deeper layers of the skin, particularly around areas prone to sagging such as the eyes and cheeks. It does not directly rebuild bone — it provides structural support by restoring the skin's inner framework, enhancing facial contours and rejuvenating the appearance.

Made with poly-L-lactic acid (PLLA)

Poly-L-lactic acid (PLLA) is a biocompatible, biodegradable substance used in aesthetic treatments for skin rejuvenation. It is widely used in facial treatments because it stimulates collagen production over time. Unlike fillers that add immediate volume, PLLA works gradually by prompting the body to produce its own collagen, leading to long-lasting improvements in skin texture and structure. The substance is absorbed by the body, making it a safe and effective route to skin restoration.

Collagen stimulation restores skin structure and reduces wrinkles

Collagen is the protein responsible for maintaining the skin's structure and firmness. As we age, collagen production declines, which leads to wrinkles and sagging skin. V-Jet Cell Renewal stimulates natural collagen production by acting on the fibroblasts within the skin. Increased collagen restores the skin's inner structure, helping to smooth wrinkles and fine lines while providing long-term structural support.

Long-lasting results (up to 2 years of effect)

Unlike topical treatments that offer temporary improvement, V-Jet Cell Renewal is built for long-lasting results, with effects lasting up to 2 years. This is due to the gradual collagen stimulation process initiated by poly-L-lactic acid, which continues even after the substance itself has been absorbed by the body. The long-term nature of the results makes it a sustainable option for anyone seeking lasting improvement in skin texture and firmness.

Natural collagen production

V-Jet Cell Renewal does not simply add artificial volume; it works by boosting the body's natural collagen production. That is what makes the result look natural — the volume restoration and wrinkle reduction come from the skin's own collagen rather than from synthetic fillers. Over time, the skin becomes firmer, smoother, and more youthful through its own regeneration process.

Restore inner skin structure

With age, the inner structure of the skin becomes compromised, leading to sagging and wrinkles. V-Jet Cell Renewal restores this structure by promoting collagen formation deep within the skin layers. That brings volume back to areas such as the cheeks and under-eye hollows, enhancing facial contours and rejuvenating the overall appearance. A strengthened inner structure helps maintain a more youthful appearance over time.

In summary, V-Jet Cell Renewal offers a comprehensive skin rejuvenation treatment by stimulating natural collagen production with the help of poly-L-lactic acid. It helps tighten skin, promote cell regeneration, and restore facial structure for long-lasting, natural-looking results.

Treatment positioning

Why clients choose V-Jet Cell Renewal

Concern

Volume and firmness that faded slowly

This service is for clients who notice flatter cheeks, hollow temples, or skin that no longer springs back the way it used to.

Positioning

A collagen stimulator without needles

PLLA is delivered by Airjet technology in a salon setting, for clients who want regenerative-style skin support before considering injectables.

Value

A months-long plan, not a single session

Your technician maps the areas that lost structure and sets a session schedule around them, so you know the timeline before you start.

What is inside

PLLA (poly-L-lactic acid) collagen stimulator

A PLLA collagen stimulator is a biodegradable, biocompatible substance delivered through Airjet technology to help rebuild lost facial volume and firmness. Unlike standard fillers that add instant bulk, PLLA microparticles activate skin fibroblasts so your own natural collagen regenerates gradually over several months.

Because the result is built by your own cells, the change appears as a slow return of density rather than a sudden addition of volume — which is exactly why it avoids an over-filled look.

Triggers fibroblasts

A deep structural scaffold

PLLA microparticles act as a scaffold that prompts skin cells to produce new collagen fibres in the treated area.

Gradual results

Change over two to three months

Improvement appears slowly across the weeks after each session instead of instantly, following your own collagen cycle.

Long longevity

Up to around two years

Regenerated collagen networks can last up to two years before the microparticles naturally break down and further sessions are needed.

Common target zones

  • Cheeks that look flatter or have lost their lift.
  • Temples that appear hollow or shadowed.
  • Nasolabial folds running from nose to mouth.
  • Marionette lines below the corners of the mouth.

Recommended session plan

  • For older adults, three to five sessions spaced about one month apart.
  • For regular maintenance with higher expectations, one session every three to four months.
  • Effects typically last up to 24 months after a completed series.
  • After that, further sessions are required to maintain the effect.

Session counts are a general guide. Your technician confirms the plan for your skin, target areas, and goals during the suitability check.

Client results

Before and after a cell renewal series

Photos from Shebella clients who completed a planned V-Jet Cell Renewal series on the face, laugh lines, or neck. Each pair is the same client over time — tap any photo to view it full size.

Individual results vary with age, skin condition, target area, and the number of sessions completed. These photos are a guide to what the treatment supports, not a guarantee of the same outcome.

The Shebella approach

How we plan a cell renewal series

We start by mapping where the face has lost structure rather than where it has lines. Cheeks, temples, nasolabial folds, and marionette lines behave differently, so the areas you care about decide the plan and the number of sessions.

V-Jet uses controlled air pressure to deliver the PLLA collagen stimulator without needles. The microparticles act as a scaffold for fibroblasts, which is why the treatment is planned as a series: each session adds to the collagen response building underneath.

Expect the visible change to arrive over two to three months rather than on treatment day. Multiple sessions spaced at roughly one month apart are usual, and once the series is complete the effect typically holds up to 24 months before top-up sessions are needed.

Who it may suit

  • You notice lost volume or firmness in the cheeks, temples, or lower face.
  • You want collagen support without injections or surgery.
  • You are comfortable with gradual change over two to three months.
  • You can commit to a series spaced about one month apart.
  • You want a subtle rebuild rather than an obvious filled look.

What to expect

  • A consultation to map which zones have lost structure.
  • A light tapping or pressure sensation during application.
  • Temporary redness, warmth, or small dots may appear.
  • Little visible change on day one — the collagen response builds over weeks.
  • A planned series, then maintenance sessions to hold the result.

Common questions

V-Jet Cell Renewal FAQ

Is V-Jet Cell Renewal an injection?

No. The PLLA collagen stimulator is delivered by needle-free Airjet technology in a salon setting. It is a non-medical cosmetic treatment, not an injectable procedure.

How is PLLA different from a filler?

A standard filler adds instant bulk. PLLA works as a scaffold that prompts your own fibroblasts to produce new collagen, so the volume you regain is built by your skin over several months.

How soon will I see a difference?

Improvements appear gradually, usually over two to three months rather than immediately after a session. If you need a same-day change, this is not the right treatment.

How many sessions do I need?

Three to five sessions spaced about one month apart is the usual recommendation for older adults. For regular maintenance with higher expectations, one session every three to four months is suggested.

How long do the results last?

Regenerated collagen networks can last up to 24 months before the microparticles fully break down. After that, additional sessions are required to maintain the effect.

Which areas can be treated?

The common zones are the cheeks, temples, nasolabial folds, and marionette lines. Suitability for each area is confirmed during your consultation.

How much does it cost?

A comparable collagen stimulator session at an aesthetic clinic is typically around $1,800. Shebella's first-trial price for V-Jet Cell Renewal is $500. Package and follow-up pricing differs, so message us for the current rate.

Which outlets offer it?

Shebella offers V-Jet Cell Renewal at Toa Payoh, Jurong East, and East Coast.

What it costs

Clinic-level collagen care at salon pricing

A comparable collagen stimulator session at an aesthetic clinic typically runs around $1,800. Shebella offers V-Jet Cell Renewal as a needle-free salon treatment, so a first trial starts at $500.

Typical aesthetic clinic

$1,800per session

The usual market rate for a clinic-delivered collagen stimulator session, before any package or follow-up costs.

Shebella first trial

$500first session

Your first V-Jet Cell Renewal session at Shebella, needle-free and consultation-led, so you can judge the treatment before committing to a full series.

Clinic pricing is a general market reference, not a quote from any named provider. Package and follow-up session pricing differs from the first-trial price — message us on WhatsApp for the current rate at your outlet.

Ask if cell renewal suits your skin

Tell us where your face looks flatter, thinner, or less firm than before. We will guide you on whether a V-Jet Cell Renewal series is a realistic match and how many sessions to plan for.

Ask Shebella
Live Agent available here
Need help choosing a treatment?